Categories

Archives

Kali Linux, Penetration Testing

Comprehensive Guide on SSH Tunneling

Basically, tunneling is a process which allows data sharing or communication between two different networks privately. Tunneling is normally performed through encapsulating the private network data and protocol information inside the public network broadcast units so that the private network protocol information visible to the public network as data. 

SSH Tunnel:  Tunneling is the concept to encapsulate the network protocol to another protocol here we put into SSH, so all network communication is encrypted. Because tunneling involves repackaging the traffic data into a different form, perhaps with encryption as standard, a third use is to hide the nature of the traffic that is run through the tunnels.

Types of SSH Tunneling:     

  1. Dynamic SSH tunneling
  2. Local SSH tunneling
  3. Remote SSH tunneling

Let’s Begin!!

Objective:  To establish an SSH connection between remote PC and the local system of the different network.

Here I have set my own lab which consists of three systems in the following network:

SSH server (two Ethernet interface) 

IP 192.168.1.104 connected with the remote system

IP 192.168.10.1 connected to local network system 192.168.10.2

SSH client (local network) holds IP 192.168.10.2

Remote system (outside the network)

In the following image, we are trying to explain the SSH tunneling process where a remote PC is trying to connect to 192.168.10.2 which is on INTRANET of another network. To establish a connection with an SSH client (raj), remote PC will create an SSH tunnel which will connect with the local system via SSH server (Ignite).

NOTE: Service SSH must be activated

Given below image is describing the network configuration for SSH server where it is showing two IP 192.168.1.104 and another 192.168.10.1

Another image given below is describing network configuration for SSH client which is showing IP 192.168.10.2

Dynamic SSH Tunneling through Windows

Remote Pc is trying to connect to SSH server (192.168.1.104) via port 22 and get successful login inside the server. Here we had used putty for establishing a connection between SSH server (Ubuntu) and remote user (Windows).

Similarly now Remote PC trying to connect with Client PC (192.168.10.2) via port 22, since they belong to the different network, therefore, he receives network error.

Step for Dynamic SSH tunneling

  • Choose option SSH >Tunnel given in the left column of the category.
  • Give new port forwarded as 7000 and connection type as dynamic and click on ADD at last.

Now connect to SSH server 192.168.1.104 via port 22 and then click on open when all things get set.

First, it will connect to the SSH server as you can see we are connected with SSH server (Ignite).

Now login into putty again and give IP of client system as Host Name 192.168.10.2 and Port 22 for SSH then click on open.

The open previous running window of putty choose Proxy option from the category and follow given below step:

  • Select proxy type as SOCKS 5
  • Give proxy hostname as 127.0.0.1 and port 7000
  • Click on open to establish a connection.

Awesome!! We have successfully access SSH client (raj) via port 7000

Dynamic SSH Tunneling through Kali Linux on Port 80

Now we are employing Kali Linux for SSH tunneling and demonstrating how an attacker or Linux user can take the privilege of Tunneling and can establish an SSH connection with client systems.

 ssh -D 7000 ignite@192.168.1.104

Enter the user’s password for login and get access to the SSH server as shown below.

Next, we need to set a network proxy for enabling socksv5 and for that follow below steps.

  • In your web browser “Firefox” go to option for general setting tab and open Network Proxy.
  • Choose No Proxy
  • Enable socksv5

Add localhost, 127.0.0.1 as Manual proxy

So from given below image, you can perceive that now we able to connect with the client: 192.168.10.2 via port 80.

Dynamic SSH Tunneling through Kali Linux on Port 22

Now connect to client machine through given below command:

ssh -D 7000 ignite@192.168.1.104

Install tsocks through apt repository using the command:

apt install tsocks

tsocks – Library for intercepting outgoing network connections and redirecting them through a SOCKS server. 

Open the tsocks.conf file for editing socks server IP and port, in our case we need to mention below two lines and then save it.

Server = 127.0.0.1

Server_port = 7000

Now connect to SSH client with the help tsocks using given below command.

tsocks ssh raj@192.168.10.2

Enter the password and enjoy the access of SSH client.

Local SSH Tunneling through Windows

Local tunneling is a process to access a specific SSH client machine for communication. It let you establish the connection on a specific machine which is not connected from the internet.

The only difference between dynamic tunneling and local tunneling is that dynamic tunneling requires socks proxy for tunneling all TCP traffic and local tunneling only required destination IP address.

Step for SSH Local tunneling

  • Use putty to connect SSH server (192.168.1.104) via port 22 and choose option SSH >Tunnel given in the left column of the category.

  • Give new port forwarded as 7000 and connection type as local 
  • Destination address as 198.168.10.2:22 for establishing a connection with the specific client and click on ADD at last.
  • Click on open when all things get set.

First, this will establish a connection between the remote pc and SSH server.

Open a new window of putty and follow given below step:

  • Give hostname as localhost and port 7000 and connection type SSH.
  • Click on open to establish a connection.

Awesome!! We have successfully access SSH client via port 7000 

Local SSH Tunneling through Kali Linux

Now again we switch into Kali Linux for local tunneling which is quite easy as compared to dynamic. Execute given below command for forwarding port to the local machine.

ssh -L 7000:192.168.10.2:22 ignite@192.168.1.104

Now open a new terminal and type below command for connecting to SSH client.

ssh raj@127.0.0.1 -p 7000

Awesome!! We have successfully access SSH client via port 7000 

Remote SSH Tunneling through Putty

Remote tunneling is functional when a client machine wants to access a remote system which is outward from its network.

First, need to install putty in our SSH server (ignite) and then follow given steps.

Step for remote tunneling

  • Enter remote system IP 192.168.1.108
  • Mention port 22
  • Go to SSH>tunnel options

  • Give new port forwarded as 7000 and connection type as Remote
  • Destination address as 198.168.10.2:22for establishing a connection with the specific client and click on ADD at last.
  • Click on open when all things get set.

Now the server will get connected to Remote system as shown in below image.

Come back to the remote system and enter the following command to with SSH client machine.

ssh raj@127.0.0.1 -p 7000

From given below image you can observe that we had successfully connected with SSH client machine via port 7000.

Remote SSH Tunneling through Ubuntu

If you are not willing to use putty for remote tunneling then you can execute the following command

ssh -R 7000:192.168.10.2:22 root@192.168.1.108

Here 192.168.1.10.2 is our local client (raj) IP and 192.168.1.108 is our remote system IP.

Come back to the remote system and enter the following command to with SSH client machine.

ssh raj@127.0.0.1 -p 7000

From given below image you can observe that we had successfully connected with SSH client machine via port 7000.

Author: Sanjeet Kumar is an Information Security Analyst | Pentester | Researcher  Contact Here

4 thoughts on “Comprehensive Guide on SSH Tunneling

  1. Your address was already in use in one of your examples. It probably worked because the address was still bound from prior putty example though.

Comments are closed.