open a Web browser and type “http://192.168.1.1” in the Web browser’s address bar, press “Enter,” then type in the username and password for the router’s control panel (the default is “admin” for both the username and password).

Click the “Maintenance” tab, then change Password

Change the Default SSID

An SSID is a 32-character alphanumeric key uniquely identifying a wireless LAN. Its refers to the name of your wireless connection, that you see on the “Available Wireless Connections” list from your laptop while connecting

Click on Interface Setup -> wireless settings -> Change the “Wireless Network Name (SSID)”

Disable SSID broadcast

Click on Interface Setup -> wireless settings -> Broadcast ssid Select no or Disable

Enable MAC filtering

Without MAC address filtering, any wireless client can join Wi-Fi network if they know the network name (also called the SSID) and perhaps a few other security parameters like encryption keys. When MAC address filtering is enabled users are granted or denied access to the WLAN network based on the MAC address of the client they use

Click on Wireless -> Wireless MAC Address filter -> Click on Activated radio Button

Enable Encryption

WEP (Wired Equivalent Protection) 64-bit and 128-bit: WEP is an old wireless encryption standard. Never use WEP encryption, which can be hacked within seconds.

WPA (Wi-Fi Protected Access): WPA-PSK is also refered as WPA-Personal. This is a new version of wireless encryption standard and more secure than WEP. Most of the wireless adapters on your laptop will  support WPA.

WPA2: This is the latest wireless encryption standard that provides the best encryption. Always use WPA2, if both your wireless router and laptop wireless adapter supports it.

Click on Interface Setup -> wireless settings -> ChangeAuthentication Type” drop-down menu, select Authentication Type 

Find who is Connected to your Network

Click Start, click Run, type cmd, and then click OK, to open a command prompt.

At the command prompt, type 

How to Connects to a Wireless Network

Replace MTNL with your own profile name

How to disconnect to a Wireless Network

How to show available Wireless Network profiles your PC

How to Saves wlan profiles as XML files to the specified location

How to Block a Wireless Connection

If you want to block this computer from accessing all wireless network use denyall option in the command. 

How to show the blocked network

How to show the installed Wireless drivers

First download ruby for windows from here

Install it in C: folder and make sure you select all the options. So Ruby is installed now.

After installing Ruby, you need to download the SQLite dll from here

Now extract the SQLite zip file on the Ruby193bin folder:

Now you need to download the ‘DevKit-tdm-32-4.5.2-20111229-1559-sfx.exe’ from here

Now extract the DevKit-tdm-32-4.5.2-20111229-1559-sfx.exe’ file on the C: folder

Open cmd prompt and go to ‘Devkit’ path and we need to run “ruby dk.rb init

Now we need to run “ruby dk.rb install’

Now a few other steps: - ruby dk.rb review (checks things are ok) –

gem install rdiscount –platform=ruby (you should see the message “Temporarily enhancing PATH to include DevKit…”)

Now you need to download the ‘BeEF Project from here

Now open the BeEF file ‘beefproject-beef-beef-0.4.3.7-0-g69c59bb’ and extract the files to C:beef

Open cmd prompt go to the BeEF path and type the following:

ruby install

Now type the below commands one by one

gem install bundler

bundle install

(You will see something similar to this)

Now Type “ruby beef” to start beef.

Of course you will need your Windows Firewall to allow that application

BeEF is installed successfully. Now go to http://127.0.0.1:3000/ui/panel and check if it is available

http://192.168.1.2:3000/ui/panel (beef is the user name and password)

Send the link http://192.168.1.2:3000/demos/basic.html to the victim via chat or email or any social engineering technique to the victim.

Now type diskpart and press Enter

Next type Lis Disk command and note down the Disk number of your USB flash drive. Select disk 1

Now you can use following commands step by step

clean 

create partition primary 

select partition 1 

active

format fs=ntfs 

assign 

exit

Now insert your Windows7/Windows 8 DVD in your CD/DVD drive and check the drive letter of the DVD drive and note down the “drive letter” of your DVD drive. In my case, it is “j:” Now type the following list of commands as shown below:

J:  cd boot   (Where “j” is my DVD drive letter).

cd boot 

bootsect.exe /nt60 h:    (Where “h” is my USB drive letter) 

exit

Copy your Windows 7 DVD contents to the USB flash drive.

Your USB drive is ready to boot and install Windows 7.

Open control panel.

Then go into programs. Click on  ‘turn windows features on or off ‘.

It will open a dialog box, just check the Telnet Client option and hit the OK button.

Now open run Dialog box type services.msc

Locate the “Telnet” service, right-click on it and select Properties.

In the Startup Type drop down menu, select “Automatic” instead of “Disabled”.Click on Apply button.

Right-click on the “Telnet” service again, but this time select Start option on right-click context menu. Telnet Server service should be running after this.

click ok

How to Connect Remote PC using Telnet

Open Command prompt and type telnet (Victim IP)

Type User name and Password of Victim PC

Now you can get access of remote PC

First open run dialog box and type ncpa.cpl

Select appropriate network connections adapter and click on Properties

Click Configure button to go through the next step.

Under “Advanced” tab you should see an item called “Network Address” click on it. (See figure below as an example)

On the right side, under “Value”, type in the New MAC address you want to assign to your NIC. 

To verify the MAC ID, simply go to command prompt and enter the command ipconfig /all.

Win7 MAC Address Changer

Win7 MAC Address changer is a freeware windows program which can change the MAC (Media Access Control) Address of many wired and wireless network adapters. Win7 MAC Address Changer is capable of spoofing MAC Address in all major windows systems including Windows XP, Windows Vista and Windows 7 (both 32bitand 64bit systems).

Download

Technitium MAC Address Changer

Technitium MAC Address Changer allows you to change (spoof) Media Access Control (MAC) Address of your Network Interface Card (NIC) irrespective to your NIC manufacturer or its driver. It has a very simple user interface and provides ample information regarding each NIC in the machine.

Download

Click on Advanced Settings in the left panel.

Select Inbound Rules in the left column of the Windows Firewall with Advanced Security window.

Select New Rule in the right column.

In the New Inbound Rule Wizard, select Port and click next.

In the next window, select the port type (TCP) and enter the port numbers and click Next

Select Block the connection and then click next.

Check all of them for the port to always stay closed and then click next.

Give this rule a name and then click Finish to add the new rule.

The port is now closed.

Unzip the file and view its content

Copy the msescan.vbs file into your Windows directory which is located in Local Disc C: / Windows

 Double click on the mseautoplay.reg file which is in the folder that you downloaded

A warning box will pop up asking if you want to add this to your registry, click yes to this. You will then get a confirmation message after it’s been added, again hit ok

Now next time you pop in a thumb drive or in fact any other form of removable storage, you will get a new option in the autoplay dialog that pops up, allowing you to scan the file with Microsoft Security Essentials.

You can use this to scan any removable media. Here is an example of the ability to scan a DVD with MSE before opening any files.

First Download Geosense Software

After Installing the Software.you need to enable Geosense. go to your>Windows Start Menu,search for location,and select Location and other sensors for the result listed under>control panel

Click Enable check box than click Apply

To view more information Click on Change who can access sensors

Download Google maps demo client   the app reveals your current location on a Google map and allows you to quickly locate facilities in your area.

Systeminfo | find /i  “boot time” 

This will show the time when you last rebooted the computer.

Other method

Start Windows Task Manager Press (Alt+Ctrl+Del) in this window, click on the Performance tab.